3
THANK YOU FOR CHOOSING
A JBL
®
PRODUCT
For more than 60 years, JBL, Inc., has been involved in every aspect of music
and film recording and reproduction, from live performances to the recordings
you play in your home, car or office.
You can be confident that the JBL
®
system you have chosen will provide every
note of enjoyment that you expected – and that when you think about purchasing
additional audio equipment, you will once again choose a JBL product.
Please take a moment to register your product at www.jbl.com to stay posted
on the latest JBL advancements. This also facilitates a better understanding
of JBL customers, allowing JBL engineers to design products that meet their
needs and expectations.
The JBL On Air WEM-1 is an advanced wireless system that allows you to
enjoy your favorite music in remote locations around your home, using almost
any loudspeaker. To ensure trouble-free performance, please carefully read
these instructions completely before connecting or using the system.
UNPACKING THE SYSTEM
Carefully unpack the system. If you suspect damage from transit, report it imme-
diately to your dealer and/or delivery service. Keep the shipping carton and pack-
ing materials for future use. Open the package and verify the following contents:
Included:
1 x Owner’s manual
1 x USA warranty sheet
1 x Receiver-amplifier module
1 x Power supply for receiver-amplifier
1 x 120V AC power cord for receiver-amplifier power supply
1 x 230V AC power cord for receiver-amplifier power supply – Shuko plug
1 x 230V AC power cord for receiver-amplifier power supply – UK plug
1 x Handheld remote control
2 x Wall-mount brackets for receiver
1 x Pedestal – to be attached on receiver’s left side if receiver is to be
used vertically
1 x Transmitter module
1 x Power supply for transmitter
1 x 120V AC power cord for transmitter power supply
1 x 230V AC power cord for transmitter power supply – Shuko plug
1 x 230V AC power cord for transmitter power supply – UK plug
1 x 6' (1.8m) Audio stereo cable, RCA-RCA
1 x Wall-mount bracket for transmitter
2 x Panhead M3 x 4 machine screws for attaching wall-mount bracket
to transmitter
4 x Small, round, self-adhesive feet – to be attached on transmitter’s
left-side panel if transmitter is to be used vertically
Wireless Transmitter
Wireless Receiver
INPUT
MUTE
VOL
1
2
0
3
Remote Control
JBLP2744-WEM1-OM.qxd 10/29/08 2:42 PM Page 3
