Service Note:
WEM-1 systems should be exchanged under the warranty period;
the electronics are not serviceable down to component level.
Order the following parts when needed:
Mechanical parts see page 7
Transmitter
part#
015-7600-00031-E
Receiver/Amplifier part#
010-7604-05194-E
- CONTENTS -
BASIC SPECIFICATIONS…………………….……………………..1
PACKAGING/ACCESSORIES……...…….………………………2
CONNECTIONS..…………………………….……………….. ….. 3
OPERATION ………….…………………….……..….….………….5
EXPLODED VIEW, Transmitter and Receiver/Amplifier …..……7
WEM-1 BASIC SPECIFICATIONS
Frequency Range:
20Hz – 20kHz (+0dB, –1dB)
Amplifier Output:
50 Watts per channel
Signal-to-Noise Ratio:
80dBA
Operating Range:
Up to 70' (22m), depending upon conditions
RF Operating Frequency:
2.4GHz
Power Requirement:
100V – 240V AC, 50/60Hz
Dimensions (H x W x D)
Transmitter Module:
1-1/8" x 6-3/16" x 4-5/8" (29mm x 158mm x 116mm)
3-3/4" (95mm) high with antenna extended
Receiver Module:
1-1/8" x 6" x 3-7/8" (29mm x 154mm x 98mm)
3-3/4"
(95mm)
high
with
antenna
extended
Weight
Transmitter Module:
0.9 lb (0.4kg)
Receiver Module:
0.6 lb (0.3kg)
Occasional refinements may be made to existing products without notice but will always meet or exceed original
specifications unless otherwise stated
1
On Air WEM-1
