background image

Gateway 900 Installation Manual 

 

Page 1 

 
 
 
 

© JBM Electronics Co. 

1-800-489-7781 

www.jbmelectronics.com

Overview 

 

JBM Electronics' Gateways are low-cost 
routers designed for users who need to 
interface Legacy protocol devices to a 
Frame Relay network.  The Gateway 900 
(G900) provides one serial port, a 
10/100BaseT port and a WAN port with 
an integrated T1/E1 DSU  
 
The Gateways convert Legacy protocols 
to TCP/IP or UDP for connection to a 
Frame Relay network.  The Gateways 
can also interface IP-only devices to a 
Legacy protocol network.  Terminal 
emulation for the IP device is available, 
providing a unique migration path for a 
network.  This capability allows an IP 
device to coexist with an older protocol 
network. 
 
 

Applications 

 
The Gateways offer several advantages 
in customer networks, including: 
 

  Converts data from Legacy protocol 

devices to TCP for connection to a 
WAN network, providing a migration 
path to an IP-based network. 

 

  Allows TCP/IP devices to access a 

Legacy protocol network. 

 

  Provides host and terminal emulation 

for all polled protocols, which allows 
up to 100 physical devices to be 
connected to one serial port. 

  Converts data from a TCP/IP device 

to UDP for Ethernet networks.

 

 

  Provide secure communications with 

optional Firewall, SSL, IPSec 
encryption and VPN tunneling 
software.  

 

  Offers RIP, OSPF and BPG routing 

for IP data. 

 

  Provides full Frame Relay support 

and complete control over the frame 
network interface, including Priority 
and CIR allocation. 

 

  Provides special support software for 

ATMs and POS devices to enhance 
error reporting and recovery. 

 

  Concentrates multiple Legacy 

protocol applications from one 
location without replacing existing 
devices.  Existing applications are 
supported with protocol conversion; 
data format manipulation, text 
manipulation, custom data translation, 
unique network addressing, or 
specialized host or terminal 
messaging.  

 

  Offers custom modifications to handle 

unique user requirements, such as 
text or data manipulation, special log-
in commands, host application 
messages, or data translations.

 

 

Summary of Contents for 900





















Reviews: