· 19 ·
REF.54290
Direct Input
Select “Direct Input” and press ENTER key to show the next
interface.
Input the fluid amount to be changed (the default value is
10L).
Press ENTER key to exchange the liquid.
Be sure that there is no leak in the pipelines.
When any leak is found, stop the immediately.
After the exchange operation is finished, the system will
automatically pop up a print menu.
Press ENTER key select print.
Press RETURN key to cancel printing.
Then, the system will return to this screen
Vehicle Selection
If you want to consult the appropriate quantity from the
database, select “Vehicle Selection”.
The screen will show the vehicle model menu.
Select a specific vehicle model and the testing interface will
display the fluid amount to be changed.
