JC MACHINERY & TOOLS INC.
Quality We Trust
___________________________________________________________________
www.jc-tool.com info@jc-tool.com
VI.
Welding parameters setting
1.
Welding temperature
Using bottoms Temperature setting knob+ and Temperature setting knob-
on the panel to set the required temperature. You can set the temperature according to
the welding materials and the ambient temperature. LCD display will show the set
temperature and the current actual temperature.
2.
Welding speed:
Using bottoms Speed setting knob+ and Speed setting knob- on
the panel to set the required speed according to the welding temperature. LCD display will
show the set speed and the current actual speed.
3.
Air volume:
Using the button on the panel
to set the air volume, increase the air volume
clockwise and reduce the air volume counterclockwise. When the ambient temperature is
too low and the current temperature can not reach the set temperature, the air volume can
be reduced appropriately.
Figure 1
Figure 2
Figure 3
Current temp.
Setting temp.
Current speed
Setting speed
Current temp.
Setting temp.
Setting temp.
Current temp.
Current speed
Setting speed
Setting speed
Current speed
