15 - Engine
54 - Flywheel
12 - Drive Plate
15 - 86
9813/5200-2
15 - 86
12 - Drive Plate
Remove and Install
Remove
1. Make the machine safe.
Refer to: PIL 01-03-27.
2. Isolate the battery.
Refer to: PIL 33-03.
3. Remove the wheel drive pump.
Refer to: PIL 27-31-00.
4. Remove the bolts 1 (x8).
5. Remove the adaptor plate.
Figure 99.
B
A
A
Adaptor plate
B
Bolts 1 (x8)
6. Remove the bolts 2 (x6).
7. Remove the drive plate.
Figure 100.
D
C
C
Bolts 2 (x6)
D
Drive plate
Install
1. The installation procedure is the opposite of the
removal procedure. Additionally do the following
step.
2. Tighten the bolts to the correct torque value.
Table 29. Torque Values
Item
Description
Nm
B
Bolts 1
30
C
Bolts 2
30
