15 - Engine
75 - Starter Motor
00 - General
15 - 102
9813/5200-2
15 - 102
Health and Safety
WARNING
Make the machine safe before
working on it. Park the machine on level ground
and lower the loader arm. Stop the engine and
remove the ignition key. Make sure the park brake
is engaged. Disconnect the battery to prevent the
engine being started. Block all four wheels.
Notice:
Before carrying out arc welding on the
machine, disconnect the battery and alternator to
protect the circuits and components. The battery
must still be disconnected even if a battery
isolator is installed.
Notice:
Do not isolate the machine electrics when
the engine is running, this may cause damage to
the machine electrics.
