8
Please see operator manual for full details.
Location of the centre of gravity
Lifting by forklift
Do not lift the machine from the side, lifting from the side may cause damage.
Forklift slots are located at the ladder side of the machine.
Machine Model
X Axis
Y Axis
S1530E
620mm
511mm
S1930E
604mm
540mm
S2032E
955mm
625mm
S2632E
956mm
672mm
S2046E
801mm
530mm
S2646E
806mm
570mm
S3246E
808mm
638mm
S4046E
815mm
676mm
S4550E
1,058mm
754mm
REFER TO OPERATORS MANUAL TRANSPORTING MACHINE
Fig 3
Operation
Lifting the Machine
39
9831/3200-3
39
Lifting the Machine
General
Lifting by Forklift
Do not lift the machine from the side. Lifting the machine from the side may cause machine damage.
1. Make the machine safe with the platform lowered.
2. Check the extension platform, controller and chassis parts are correctly secured.
3. Remove any loose items from the machine.
4. Keep the machine in the lowered position while lifting with the forklift.
5. Use the forklift slots at the ladder side at the end of the machine.
5.1. Align the forks with the forklift slots at the end of the machine.
5.2. Drive the forklift forwards until the forks carriage almost touches the ladder
5.3. When lifting the machine rotate the forks back slightly to ensure the machine will not slide off the forks.
Travel with the machine at the specified distance from the ground.
Length/Dimension/Distance: 0.4m
5.4. Level the forks before landing the machine.
A
Forklift slots
Lifting by Hoist
1. Make the machine safe with the platform lowered.
2. Check the extension platform, controller and chassis parts are correctly secured.
3. Remove any loose items from the machine.
4. Use the correct length of hoisting rope to prevent damage to the platform base and guardrail.
5. Make sure the hoist rigging is in the correct position. Adjust the hoist rigging to prevent machine damage
and keep the machine in the level position.
Lifting Points
