18
JCB-18AG
Instruction & User Manual
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the tool. The tool has no
internal parts that the user can service or
repair. Never try to repair the tool yourself.
Take to an authorised service centre.
WARNING!
Transport and Storage
m
If the tool will remain unused for any length
of time, it should be stored in the original
packaging.
m
Store the tool in a dry, frost-free, well
ventilated place with a temperature of no
more than 40°C.
m
Keep all tools out of the reach of children.
m
Always switch off the tool and disconnect it
from the power supply (remove the battery/
unplug the power cord) before transport.
m
Always carry the tool using the purpose-
designed handle.
m
Ensure that the tool is not at risk of tipping
over or exposed to excessive vibration and
shocks during transport, especially if the tool
will be transported by car or other vehicle.
