jcb JCB-20BLRH, Instructions & User'S Manual

17

JCB-20BLRH
Instruction & User Manual

Maintenance

Switch off the power tool and disconnect 
the power (remove battery/unplug) before 
cleaning and maintenance – risk of electric 
shock and accidental start.

WARNING!

m

Wipe the power tool with a dry or damp 
cloth. Do not use a wet cloth. Do not use 
detergent that contains solvent or corrosive, 
abrasive additives – risk of damaging the 
surface.

m

Keep the ventilation openings open – risk of 
overheating.

m

Clear the power tool vents and the 
accessory mount of dust and dirt after 
each use. Do not clean ventilation holes 
by inserting sharp objects in them, such as 
screwdrivers and other similar objects.

m

Stubborn contamination in areas hard to 
access can be removed with compressed air 
(max 3. bar).

m

Regularly check all fasteners, screws and 
bolts to make sure that they are tight. 
Tighten any loose screws immediately – 
serious injury could occur.

Transport and Storage

m

If the power tool will remain unused for any 
length of time, it should be stored in the 
original packaging.

m

Store the power tool and battery in a dry, 
frost-free, well ventilated place.

m

Keep all power tools out of the reach of 
children.

m

Always switch off the power tool and 
disconnect it from the power supply 
(remove the battery/unplug the power 
cord) before transport.

m

Always carry the power tool using the 
purpose-designed handle.

m

Ensure that the power tool is not at risk 
of tipping over or exposed to excessive 
vibration and shocks during transport, 
especially if the power tool will be 
transported by car or other vehicle.

Operating temperature: 0-40 °C
Storage temperature: 20-60 °C

NOTE