JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
and workshop apron capable
of stopping small abrasive or
workpiece fragments.
The eye
protection must be capable of
stopping flying debris generated
by various operations . The
dust mask or respirator must
be capable of filtrating particles
generated by your operation.
Prolonged exposure to high
intensity noise may cause hearing
loss.
i) Keep bystanders a safe
distance away from work area.
Anyone entering the work area
must wear personal protective
equipment.
Fragments of
workpiece or of a broken
accessory may fly away and
cause injury beyond immediate
area of operation.
j) Hold power tool by insulated
gripping surfaces only, when
performing an operation where
the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a
"live" wire may make exposed
metal parts of the power tool "live"
and could give the operator an
electric shock.
k) Position the cord clear of the
spinning accessory.
If you lose
control, the cord may be cut or
snagged and your hand or arm
may be pulled into the spinning
accessory.
l) Never lay the power tool down
until the accessory has come to
a complete stop.
The spinning
accessory may grab the surface
and pull the power tool out of
your control.
m) Do not run the power
tool while carrying it at your
side.
Accidental contact with
the spinning accessory could
snag your clothing, pulling the
accessory into your body.
n) Regularly clean the power
tool’s air vents.
The motor’s
fan will draw the dust inside
the housing and excessive
accumulation of powdered metal
may cause electrical hazards.
o) Do not operate the power tool
near flammable materials.
Sparks
could ignite these materials.
p) Do not use accessories that
require liquid coolants.
Using
water or other liquid coolants may
result in electrocution or shock.
q) Your hand must hold on the
handle when you are working.
Always use the auxiliary handles
supplied with the tool. Loss of
control can cause personal injury.
Further safety instructions
for all operations
Kickback and Related
Warnings
Kickback is a sudden reaction to
a pinched or snagged rotating
disc, backing pad, brush or any
