JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0845 6005526
CHARGING PROCEDURE
NOTE:
Before using the
tool, read the safety and
operating manual carefully.
1. CHARGING YOUR
BATTERY PACK
The battery charger supplied
is matched to the Li-ion battery
installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected
against deep discharging. When
the battery is empty, the machine
is switched off by means of a
protective circuit: The chuck no
longer rotates.
In a warm environment or after
heavy use, the battery pack may
become too hot to permit charging.
Allow time for the battery to cool
down before recharging.
When the battery pack is charged
for the first time and after prolonged
storage, the battery pack will accept
a 100% charge after several charge
and discharge cycles.
2. BEFORE USING YOUR
CORDLESS TOOL
Your battery pack is UNCHARGED
and you must charge once before
use. When you charge the new
battery or one which has not been
used for long periods of time, it may
not reach full charge until after you
have discharged it fully in use and
recharged it several times.
