JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
rotation “ ”.
Warning:Never change the
direction of rotation while
the tool is rotating, wait until it
has stopped.
8. ADJUSTABLE DEPTH
STOP
Fit the drill bit into the chuck.
Loosen the depth stop by rotating
the handle anti-clockwise. Slide
the depth stop until the distance
between the depth stop end and the
drill bit end is equal to the depth of
hole/screw you wish to make. Then
clamp the depth stop by rotating
the handle clockwise.
9. FUNCTION MODE
SELECTION (See D)
The operation of the gearbox for
each application is set with the
function mode selection switch
(4). To change between functions,
depress the unlocking button (12)
and rotate the selector to the desired
operating mode.
For simultaneous drilling
and impacting of concrete
or masonry, choose the
Hammer drilling position.
For drilling into steel, wood
and plastics choose the
Rotary drilling position.
For impacting only - for
light chipping, chiseling
and demolition applications
choose the Hammer position.
12
D
12
