JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
NOTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED USE
The machine is intended for dry
sanding of wood, plastic, filler and
coated surfaces.
1. FIT THE SANDING PAPER
A) MESH SANDING SHEET (WITH
HOOK & LOOP SYSTEM)(See A1)
The mesh sanding sheet are placed
directly onto the base plate. Before
placing on the mesh sanding sheet,
free the base plate from dust/debris
by lightly tapping against it.
B) SANDING PAPER WITHOUT
HOOK & LOOP SYSTEM (See A2)
Lightly lift the clamp lever (6) and
unlatch it.
Slide the sanding paper under the
sand paper clamp lever and reinsert
the clamp lever( 6).
Make sure that the sanding paper
faces firmly against the base plate.
Fold the sanding paper around and
clamp the other end in the same
manner.
Sanding paper without holes, e. g.
from rolls or by the meter, can be
punctured with the paper punch for
use with dust extraction.
OPERATING INSTRUCTIONS
A2
A1
10
D
C2
C1
B
10
