JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
2. REMOVE THE SANDING
PAPER
A) MESH SANDING SHEET (WITH
HOOK & LOOP SYSTEM)
Simply remove the mesh sanding
sheet directly.
B) SANDING PAPER WITHOUT
HOOK & LOOP SYSTEM
To remove the sanding paper, lift
up the clamp lever and move away
from the clamp lever lock. The
sanding paper clamp is now loose.
Repeat with the other clamp on the
opposite side of your sander.
3. PAPER PUNCH
If using sanding paper without
dust holes, use the paper punch
(9) to perforate the holes to ensure
correct dust extraction. Position the
punch over the base-plate (5) with
the punch sides on the edges of the
base-plate.
Press the punch into the base-plate
to punch holes into the sanding
paper. Then remove the punch
and check all the holes have been
formed correctly.
4. CYCLONIC DUST BOX
(See B)
A) ATTACH THE CYCLONIC DUST
BOX
Your sander is equipped with a
cyclonic dust box. To attach, slide
the box onto the outlet piece and
A2
A1
10
D
C2
C1
B
