JCB, SO53 3LE
www.jcb-tools.com
Customer Helpline 0333 0143092
take care that the latching lever
engages.
Caution:
To prevent the possibility of
sanding dust or foreign body being
thrown into your face or eyes, never
attempt to use your sander without
the dust box properly installed.
B) EMPTY THE CYCLONIC DUST
BOX (See C1 C2)
For more efficient operation,
empty the cyclonic dust box every
5-10mins. This will permit the air to
flow through the box better.
To empty the box, press the latching
lever in and pull off the box. Then
press the button at the rear of the
box to open it, and shake out dust.
5. OPERATING THE SWITCH
(See D)
To start your sander, depress the
protective cover over the switch at
the position marked“I”. To stop your
sander, depress the protective cover
at the position marked “0”.
6. FLUSH SANDING
FACILITY
Your sander can sand flush on three
sides of the baseplate which allows
easy access to corners and edges
of mouldings.
7. ORBITAL SANDING
Your sander operates in small
circular rotations which allows
A2
A1
10
D
C2
C1
B
