jcb JCB-SS280, Safety And Operating Manual

Positec Australia Pty Limited 
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028  

NOTE: 

Before using the tool, 

read the instruction book 

carefully.

INTENDED USE

The machine is intended for dry 
sanding of wood, plastic, filler and 
coated surfaces.

ASSEMBLY
1. FIT THE SANDING PAPER

A) MESH SANDING SHEET (WITH 
HOOK & LOOP SYSTEM)(See A1)

The mesh sanding sheet are placed 
directly onto the base plate. Before 
placing on the mesh sanding sheet, 
free the base plate from dust/debris 
by lightly tapping against it.

B) SANDING PAPER WITHOUT 
HOOK & LOOP SYSTEM (See A2)

Lightly lift the clamp lever (8) and 
unlatch it.
Slide the sanding paper under the 
sand paper clamp lever and reinsert 
the clamp lever (8).
Make sure that the sanding paper 
faces firmly against the base plate.
Fold the sanding paper around and 
clamp the other end in the same 
manner.
Sanding paper without holes, e. g. 
from rolls or by the meter, can be 
punctured with the paper punch for
use with dust extraction.

OPERATING INSTRUCTIONS

A2

11

1

2

A1

11

C

5

B

1

2

D

E2

E1