jcb JCB-SS280, Safety And Operating Manual

Positec Australia Pty Limited 
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028  

4. CYCLONIC DUST BOX 

(See D)

A) ATTACH THE CYCLONIC DUST 
BOX 

Your sander is equipped with a 

cyclonic dust box. To attach, slide 

the box onto the outlet piece and 

take care that the latching lever 

engages.

CAUTION:

To prevent the possibility of 

sanding dust or foreign body being 

thrown into your face or eyes, never 

attempt to use your sander without 

the dust box properly installed.

B) EMPTY THE CYCLONIC DUST 
BOX (See E1,E2)

For more efficient operation, 

empty the cyclonic dust box every 

5-10mins. This will permit the air 

to flow through the box better. To 

empty the box, press the latching 

lever in and pull off the box. Then 

press the button at the rear of the 

box to open it, and shake out dust.

5. FLUSH SANDING 

FACILITY

Your sander can sand flush on three 

sides of the base plate which allows 

easy access to corners and edges 

of mouldings.

6. ORBITAL SANDING

Your sander operates in small 

circular rotations which allow 

efficient material removal. Operate 

A2

11

1

2

A1

11

C

5

B

1

2

D

E2

E1