background image

Introduction

Safety Check List

15

15

9821/1350-8

!M

CAUTION

'O' rings, Seals and Gaskets

Badly fitted, damaged or rotted 'O' rings, seals and 
gaskets can cause leakages and possible accidents. 
Renew whenever disturbed unless otherwise 
instructed. Do not use Triochloroethane or paint 
thinners near 'O' rings and seals.

INT-3-2-12

!M

WARNING

Hydraulic Hoses

Damaged hoses can cause fatal accidents. Inspect the 
hoses regularly. Do not use the machine if a hose or 
hose fitting is damaged.

INT-3-3-2_4

!M

CAUTION

Waxoyl contains turpentine substitute which is 
flammable. Keep flames away when applying Waxoyl. 
Waxoyl can take a few weeks to dry completely. Keep 
flames away during the drying period.

Do not weld near the affected area during the drying 
period. Take the same precautions as for oil to keep 
Waxoyl off your skin. Do not breathe the fumes. Apply 
in a well-ventilated area.

5-3-1-9

!M

WARNING

Working Under the Machine

Make the machine safe before getting beneath it. 
Ensure that any fitments on the machine are secure; 
engage the park brake, remove the starter key, 
disconnect the battery.

INT-3-3-8_2

!M

WARNING

Certain seals and gaskets (e.g. crankshaft oil seal) on 
JCB machines contain fluoroelastomeric materials 
such as Viton

®

, Fluorel

TM

 and Technoflon

®

Fluoroelastomeric materials subjected to high 
temperatures can produce highly corrosive 
hydrofluoric acid. THIS ACID CAN SEVERELY BURN.

New fluoroelastomeric components at ambient 
temperature require no special safety precautions.

Used fluoroelastomeric components whose 
temperatures have not exceeded 300°C (572°F) require 
no special safety precautions. If evidence of 
decomposition (e.g. charring) is found, refer to the 
next paragraph for safety instructions DO NOT TOUCH 
COMPONENT OR SURROUNDING AREA.

Used fluoroelastomeric components subjected to 
temperatures greater than 300°C (572°F) (e.g. engine 
fire) must be treated using the following safety 
procedure. Make sure that heavy duty gloves and 
special safety glasses are worn:

1

Thoroughly wash contaminated area with 10% 
calcium hydroxide or other suitable alkali 
solution, if necessary use wire wool to remove 
burnt remains.

2

Thoroughly wash contaminated area with 
detergent and water.

3

Contain all removed material, gloves etc. used in 
this operation in sealed plastic bags and dispose 
of in accordance with Local Authority 
Regulations.

DO NOT BURN FLUOROELASTOMERIC MATERIALS.

INT-3-3-5_4

!M

WARNING

Protect your eyes when grinding metal. Wear safety 
glasses or goggles. Remove or protect any 
combustible materials from the area which could be 
ignited by sparks.

GEN-1-12

Summary of Contents for JS 200 Series
































Reviews: