JCM GLOBAL DT-300 Series, Operator Integration Manual

P/N 960-000167R_Rev. 1 {EDP #214645} 

© 2013, Japan CashMachine Co., Limited

5

DT-300™ Series Download Tool Operator Integration Guide

6 INSTALLATION

Battery Installation

Perform the following steps to install Batteries into 

the DT-300™ Device:

1.  Push the two (2) Tabs of the Battery Cover in the 

direction of the Arrow illustrated in Figure 4

a

 and 

lift the Cover off of the Device.

2.  Install four (4) AAA Batteries into their correct 

polarized position in the direction illustrated in 

Figure 4.

3.  Place the Battery Cover back into its original 

position, and listen for it to “Click” back into 

place.

SD Card Installation

I

NSTALLATION

TO

A

 PC 

OR

A

 C

ARD

 R

EADER

Perform the following steps to install the SD Card 

into a PC or an SD Card Reader:

1.  Insert the SD Card into an SD Card Reader, or an 

SD Card Reader Slot of the PC.

2.  Create each model Folder in the first layer of the 

SD Card. Each Folder Name needs to include a 

“space” before the word “System”.

3.  Save the Software Data Files (xxxxxxxxx.COM) 

for each Model’s Folder. Refer to the “Software 

Data File” on page 13 of this Guide for more 

details. 

SD C

ARD

 I

NSTALLATION

 I

NTO

A

 DT-300

Perform the following steps to install/remove the 

SD Card into/from a DT-300™ Device:

1.  Ensure the DT-300™ Power is OFF.
2.  Slide the SD Card into the Unit in the direction 

indicated by the Red Arrow shown in Figure 8 

until it “clicks” in place.

Tabs

+

+

a

Figure 4 

Type AAA Battery Installation

NOTE: When creating the storage Folder for 
each Model, use the SD Card Slot of a PC or an 
SD Card Reader.

SD Card

SD Card

SD Card

SD Card
Slot

Reader

Figure 5 

SD Card Insertion (PC or Card Reader)

Space

Figure 6 

Model Name Creation

NOTE: Up to twenty (20) Folders can be 
created on an SD Card.

Figure 7 

Model Folder Creation

NOTE: Refer to “Compatibility” on 
page 14 for the details regarding each 
Model’s setting.

NOTE: Do NOT erase the 
“BWDXCARD.INF” Card Information File! 
If the Card Information is lost, Card 
Reading errors may occur.

NOTE: When removing the SD Card, 
follow the User Guide of the PC, or the 
SD Card Reader.

SD Card

SD Card Slot

Figure 8 

SD Card Insertion (DT-300)