background image

 P/N 960-000167R_Rev. 1 {EDP #214645}

 © 2013, Japan CashMachine Co., Limited

v

 DT-300™ Series

 Operator Integration Guide

List of Tables

Page

LOT

Table 1   DT-300 Technical Specifications....................................................................4
Table 2   DT-300 Environmental Specifications ............................................................4
Table 3   DT-300 Electrical Specifications.....................................................................4
Table 4   DT-300 Structural Specifications....................................................................4
Table 5   Boot Mode Selection ......................................................................................6
Table 6   Acceptance Log..............................................................................................8
Table 7   Reading Denomination Table.........................................................................8
Table 8   Log Storage Limit .........................................................................................10
Table 9   Acceptance Logs Available ..........................................................................10
Table 10  Performance and Battery Condition .............................................................12
Table 11  Battery Condition Indication .........................................................................12
Table 12  Various Sleep Mode Screens.......................................................................12
Table 13  Software Data File Information.....................................................................13
Table 14  Received Log Files.......................................................................................13
Table 15  Existing Firmware File ..................................................................................13
Table 16  EEPROM Data File Information ...................................................................13
Table 17  DT-300 USB Type “A” Pin Assignments ......................................................13
Table 18  DT-300 Compatible Validators .....................................................................14
Table 19  Bootloader Error Codes................................................................................15
Table 20  MainApplication Error Codes........................................................................15

Summary of Contents for DT-300 Series

































Reviews: