P/N 960-000186R_Rev. A {EDP #253995}
© 2016, JAPAN CASH MACHINE CO., LTD.
3
RDM-100™ Series Retail Deposit Module
Preventive Maintenance
The preventive maintenance requirements are
defined as follows:
1. When closing the covers of each Unit, ensure that
it clicks firmly into place.
2. Do not redesign or disassemble the RDM-100.
Unauthorized use by inadequately trained person-
nel, or use outside the original manufacturer’s
intent for operation voids the warranty.
3. Perform routine cleaning and maintenance at least
once a month to keep the Unit’s performance sta-
ble.
4. Use a soft, lint-free cloth, cotton swab or non-
flammable compressed air spray to clean dust and
debris from the Sensors and Rollers.
5. If the Unit is exposed to water or liquids, use a
clean, dry micro-fiber cloth to wipe off and
absorb excess liquids immediately. Any remain-
ing liquids may affect and degrade the Sensors
and Validation component performance.
B
ANKNOTE
F
ITNESS
R
EQUIREMENTS
The following Banknote types may not validate
correctly, or worse, can cause a jam and/or damage
to the unit’s Transport Path. Banknotes exhibiting
the following conditions illustrated in Figure 3
should be avoided:
• torn
• excessive folds or wrinkles
• dirty
• curled
• wet
• containing foreign objects and/or oil
Primary Features
This RDM-100 Series Retail Deposit Module con-
tains the following primary features:
•
250 Note Capacity BNF –
Two hundred fifty
Banknotes can be inserted into the BNF
Insertion Slot at one time.
•
High-Speed Processing –
The deposit
processing speed is 6 Notes per second
(150mm Banknotes).
•
Deposit Module featuring the BAU Unit –
High-
Speed and High-Performance Banknote
Acceptor Unit; the BAU is featured as the
Validation Unit. The Banknotes validated by
the BAU are stacked into the Cash Box.
Banknotes that can not be validated as
authentic are returned to the Return Tray.
Caution: Be careful to avoid personal
injury to your fingers when closing the
each cover or Transport Assembly.
WARNING: Do not inject water or liquid
agents of any kind into the Unit, as this
may cause extreme damage to the Unit.
WARNING: To minimize risk of damage
to internal printed circuit boards, never
allow excess fluid (e.g., from a wet
cleaning cloth) to drip or leak into the
device. Internal printed circuit boards
may be damaged. Do not use any
alcohol, citrus based cleaners, solvents
or scouring agents that can damage the
plastic surfaces of the device.
Caution: Make sure Interface Harness
connections to the Host Machine are
shorter than 9.84 Feet (3 Meters) in
length. Cut off all unused portions of
the Interface Harness wiring to avoid
static electrical effects or short circuit
possibilities that could cause damage
to the Unit.
WARNING: This Unit is designed for
use with a Current limiting Power
Source! Design the Host Cabinet space
to meet all local related safety
standards.
Figure 3
Damaged Banknotes
Wrinkled Banknotes
Curled Banknotes
Folded or Partial Banknotes
Figure 3
Unacceptable Banknotes
