11
TBV™-100/101 Units
BLUEWAVE DOWNLOAD TOOLS
BLUEWAVE 2.0 (DT-200)
To access BlueWave 2.0 Download Tools, perform the following
steps:
1. Copy the
TBV Firmware
file to the SD Card’s
DOWNLOAD
folder.
2. Place the TBV Unit in Forced Download mode (with
DS1
or
DS3
Switches
#1, 6, 7
and
8
ON
).
3. Reapply Power to the TBV Unit.
4. Connect the BlueWave 2.0 (DT-200) Unit to the TBV Unit
a
) using a Male A to mini-B USB cable.
5. When the BlueWave 2.0 Unit’s Top LED (Figure 4
b
) turns
GREEN
, press the
Load
d
) to start the
Firmware Download.
6. When the BlueWave 2.0 Unit’s Top and Middle LEDs
b/c
) turn
GREEN
, the Download is complete.
Figure 4
BlueWave 2.0 (DT-200) Unit
b
c
a
d
