P/N 960-100925R_Rev. A {EDP #186705}
© 2010, Japan CashMachine Co, Limited
3
Transaction Based Validator Integration Guide
Primary Features
The TBV Series of Banknote Validator contains the
following primary features:
• Ability to accept 50 Banknotes at a time.
• High validation capability using the Centering
Mechanism and its own high precision Sensors.
• Able to stack up to 2,000 Banknotes in the
Plastic Cash Box.
Model Descriptions
Table 1 lists the Product Model Number
Descriptions.
Type Descriptions
Table 2 lists the Product Type Number
Descriptions.
Software Descriptions
Table 3 lists the various Software Number
Descriptions.
Precautions
The Figure 3 symbols are defined as follows:
1. (
Type 1
) Do not insert a torn, folded, or wet Ban-
knote, as this action may cause a Banknote jam
inside the Unit.
2. (
Type 2
) Do not expose the Unit to water. The
Unit contains several precision electronic devices
which can be damaged if water or liquid of any
kind is sprayed or spilled into the Unit.
3. (
Type 3
) Do not install the Unit into a dusty
environment. Dust may affect and degrade the
various Sensor’s performance.
U
SER
C
AUTIONS
Careful measures are taken in this product design to
ensure its quality, however, the following cautions
should be read and understood by all users in order
to confirm safe operation.
Installation Cautions
1. Do not allow the Unit to endure or operate at a
high temperature, in high humidity and/or in a
dusty environment.
2. Do not install the Unit into an area where exces-
sive vibration or shocks are present.
3. This equipment is not full warranted for outdoor
use. Be sure that the Host Machine contains
enough protection to avoid wet or dusty condi-
tions when installing it in both open-air and
indoor spaces.
4. Avoid exposing the Unit to direct Sunlight and/or
an incandescent Lamp illumination having a
Gradient Angle of 15 Degree or more, and an il-
lumination index of 3,000 Lux or less.
5. Insure that the Host Machine is designed for daily
operational access such as maintenance and/or
clearing a Banknote Jam.
Table 1
TBV Software Number Specifications
N
o
Software: TBV
-
* * * - * * *
N
o
(1) (2)(3)(4) (5)(6)(7)
(1) Product Series Name
(2) Validate Sensor
1 = World Wide Type (Standard)
(3) Option Board
0 = None (Standard)
(4)
Centering Unit
0 = Feature (Guide Width 60 - 85mm)
1 = None (USA Dollar 66mm only)
*
*. The width dimensions of the BNF Section’s Guide, the Validation Section and the
Bezel are all of an equal size.
(5)
Accessory Unit
F = BNF Unit
G = Shutter Unit
0 = Reserved
†
†. “0” = can be blank or omitted.
(6)
Stacker Type
SH = Horizontal Stack Mechanism
LD = No Stack Mechanism
(7)
Box Access
0 = Front Access Frame (Standard)
†
B = Back Access Frame
Table 2
TBV Type Specifications
N
o
Type: * * *
* * - * * *
N
o
(1)(2)(3)(4)(5)(6)(7)(8)
(1)
Box Capacity
0 = No Cash Box
K = 2,000 notes
(2)
Box Option
0 = Thumb Twist Lock Knob (Standard)
1 = Sealing
(3)
ICB
0 = None (Standard)
1 = Optical Transport Method
(4)
Bezel Type
0 = None
1 = Plastic (Standard)
2 = Metal
(5) I/F Harness
1 = Standard
(6) Reserved
(7) Reserved
(8) Reserved
Table 3
TBV Software Number Specifications
N
o
Software: TBV-100 FSH * * * - * * * - V * .* *
N
o
(A) (B) (C) (D)
(A) Software Model Name
(B) Denomination (Country)
*
*. The Country Code is indicated by three (3) Alphabetical Characters following the
JIS Standard.
(C) Interface Protocol Name
(D) Software Version
Type 1
Type 2
Type 3
Figure 3
Precautionary Symbols
