P/N 960-100925R_Rev. A {EDP #186705}
© 2010, Japan CashMachine Co, Limited
5
Transaction Based Validator Integration Guide
Table 4
TBV Technical Specification
Acceptance Rate:
98% or greater
Note: The following banknote types are excluded:
a) Worn, dirty wet, stained, torn or excessively wrinkled Banknotes
b) Double (dual) Banknotes
c) Banknotes adhering Oil or Iron powder
d) Banknotes having folded corners or edges
e) Banknotes with excessive or inadequate magnetism or unclear graphics
f) Banknotes having the wrong cut dimensions or a printing displacement
g) Banknotes having excessive fold lines or specific Banknote processing
machine markings.
Bill Types Accepted:
Long side: 110-170mm (4.33-6.69 in.)
Short side: 60-85mm (2.36-3.35 in.)
Barcode Coupon
*
:
Standard Specification
a) Read code interleaved: 2 of 5
b) Narrow Bar: 0.5mm-0.6mm (0.019-0.023 in.)
c) Wide Bar/Narrow Bar = 3:1
d) Characters: 18 Characters
e) Print Position: Middle (Divide a Coupon equally on the left, right, top and
bottom of the Coupon’s center)
f) Print Width: Wider than 10mm (0.39 in.)
Batch
Up to 50 Notes
Insertion Direction:
Banknote: Four-way
Barcode Coupon: Two-way (Only with Surface facing upward)
Processing Speed
†
:
Fixed Type:
•
Banknote
–
Approximately 1.3 seconds/note from Banknote insertion to Escrow.
–
Approximately 1.7 seconds/note between the first and next Banknote insertion
during a sequential insertion operation.
•
Barcode Coupon/Double Read
‡
–
Approximately 3.0 seconds/note from Banknote insertion to Escrow.
–
Approximately 3.7 seconds/note between the next Banknote insertion during a
sequential insertion operation.
•
Barcode Coupon/Single Read
‡
–
Approximately 1.3 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.0 seconds/note between the next Banknote insertion during a
sequential insertion operation.
Centering Model:
•
Banknote
–
Approximately 1.6 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.0 seconds/note between the next Banknote insertion during a
sequential insertion operation.
•
Barcode Coupon/Double Read
‡
–
Approximately 3.5 seconds/note from Banknote insertion to Escrow.
–
Approximately 4.2 seconds/note between the next Banknote insertion during a
sequential insertion operation.
•
Bar-code Coupon/Single Read
‡
–
Approximately 1.6 seconds/note from Banknote insertion to Escrow.
–
Approximately 2.3 seconds/note between the next Banknote insertion during a
sequential insertion operation.
Validation Method:
Optical (6 Illumination, [Transmissive/Reflective]) and Magnetic
Diagnostic Indicators:
LED Full Color
Escrow:
1 Note
Anti-stringing Mechanism:
Optical Sensor & Pusher Mechanism
Interface:
Photo-Coupler Isolation, RC232C, ccTalk, USB (Full Speed)
*. Refer to the specific “Bar Code Coupon Specification” Sheet for more details.
†. The time between the first Banknote insertion to the next Banknote sequential insertion operation.
‡. The Barcode Coupon Reading Specification can be changed by DIP Switch Settings.
2 SPECIFICATIONS
Technical Specifications
