P/N 960-100925R_Rev. A {EDP #186705}
© 2010, Japan CashMachine Co, Limited
2 3
Transaction Based Validator Integration Guide
Red
(3)
Red
(3)
Stack Motor
Lock-up Problem
While operating the Stack Motor, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Stack Motor, Stack Motor Encoder, Pusher Mechanism, Pusher
Plate.
If the error is not resolved, change the above related part or parts.
Red
(4)
Red
(4)
Centering Motor
Lock-up Problem
While the Centering Motor is operating, no pulse inputs exist greater than the rated
value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Centering Motor, Centering Guide, Centering Home Sensor.
If the error is not resolved, change the above related part or parts.
Red
(5)
Red
(5)
BNF Unit Problem
While operating the BNF Section, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] BNF Feed Motor, Banknote Press Motor.
If the error is not resolved, change the above related part or parts.
Red
(6)
Red
(6)
Shutter Error
While the Shutter Motor is operating, Sensors detect abnormal movement.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Shutter Motor, Shutter Sensor
If the error is not resolved, change the above related part or parts.
Red
(7)
Red
(7)
Banknote Jam
at the Pusher
Mechanism
Home Position
The Pusher Mechanism Home Position Sensor detects that the Pusher Mechanism
has not moved to the Home end position.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Pusher Mechanism, Stack Motor, Stack Home Sensor, Stack Motor
Encoder.
If the error is not resolved, change the above related part or parts.
Red
(8)
Red
(8)
Pusher Mechanism
Home Position
Problem
When stacking Banknotes, the Pusher Mechanism is not returning to the Home end
position.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Pusher Mechanism, Stack Motor, Stack Home Position Sensor,
Stack Encoder Sensor.
If the error is not resolved, change the above related part or parts.
Red
(9)
Red
(9)
Pusher Mechanism
Half-way Position
Problem
The Pusher Mechanism is not returning to the Pusher Mechanism Half-way
Position.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Pusher Mechanism, Stack Motor, Pusher Mechanism Half Sensor,
Stack Motor Encoder
If the error is not resolved, change the above related part or parts.
Red
(10)
Red
(10)
Centering Home
Position Problem
The Centering Mechanism is not presently seated at its Home end position.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Centering Motor, Centering Guide, Centering Home Sensor
If the error is not resolved, change the above related part or parts.
Red
(11)
Red
(11)
Feed Motor Speed
Problem
While Initializing, no pulse inputs exist greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Feed Motor, Feed Motor Encoder.
If the error is not resolved, change the above related part or parts.
Red
(12)
Red
(12)
BNF Section
Communication
Error
While the BNF is communicating, no communication data exists that is longer than
the expected rated time.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] BNF Communication Harness.
If the error is not resolved, change the above related part or parts.
Red
(13)
Red
(13)
ICB
Communication
Error
While the ICB is communicating, no communication data exists that is longer than
the expected rated time.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] ICB Board.
If the error is not resolved, change the above related part or parts.
Table 21
Standard LED Error Codes (Continued)
On-line
Off-line
Error
Causes and Solutions
LED Color
(Flash
Sequence)
LED Color
(Flash
Sequence)
