P/N 960-100925R_Rev. A {EDP #186705}
© 2010, Japan CashMachine Co, Limited
2 5
Transaction Based Validator Integration Guide
Reject Error Codes
Table 22 lists the various LED Flash Reject Code causes & solutions.
Table 22
LED Flash Reject Error Codes
On-line
Off-line
Error
Causes and Solutions
LED Color
(Lit)
LED Color
(Flash
Sequence)
Blue
Green
(1)
Skew Insertion
Error
The Banknote has been inserted in an incorrect direction.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Centering Guide, Centering Sensor, Belts Rollers.
If the error is not resolved, change the above related part or parts.
Blue
Green
(2)
Abnormal Magnetic
Detection
The Magnetic Sensor detects an abnormal Banknote Type.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Magnetic Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(3)
Remaining
Banknotes
Returned
While Initializing, Sensors detect that Banknotes remain in the TBV Unit.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] BNF Entrance Sensor, BNF Assignation Sensor, Entrance Sensor,
Line Sensor, Feed-out Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(4)
Magnification
Problem
When adjusting Banknote data, Sensors detect an abnormal Banknote
magnification condition.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Line Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(5)
Banknote
Transportation
Problem
Sensors detect Banknotes remain in path, or none exist during an abnormal timing
interval.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] BNF Assignation Sensor, Entrance Sensor, Centering Sensor, Line
Sensor, Feed-out Sensor, Box Feed-out Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(6)
UV Sensor
Problem
The UV Sensor detects an abnormal Banknote Type.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] UV Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(7)
Pattern Error
The Line Sensor detects an abnormal Banknote Type.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Line Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(8)
Double Banknotes
Detected
The Line Sensor’s transparency level is less than the accepted value. Dirt, stickers,
or foreign object may be present on the Banknote.
[Solution] Confirm the Banknote’s condition.
If the error is not resolved, change the above related part or parts.
Blue
Green
(9)
Inhibit Setting
Problem
The Banknote accept/inhibit setting is being made by a command from the Host
Machine.
[Solution] Check that the Commands from the Host Machine are correct, and
change its setting to be acceptable for use with the TBV Unit.
DIP Switch settings are incorrect.
[Solution] Check that the DIP Switch settings are properly set.
Blue
Green
(10)
Reject Order
The TBV received a Reject command form the Host Machine.
[Solution] Check that the Command from the Host Machine is correct.
Blue
Green
(11)
Cash Box Removal
While transporting a Banknote, Sensors detect a Cash Box removal.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Box Sensor, Box Lock Sensor.
If the error is not resolved, change the above related part or parts.
Blue
Green
(12)
Fraud Detection
The Side Sensor Level interval between before, and after, a Banknote has passed
the Side Sensors is greater than the rated value.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Side Sensor.
If the error is not resolved, change the above related part or parts.
