background image

 

9

Functionning

 

2

Free

applications manual for Free system

Groups concept

Free

T is able to manage up to 21 diferent doors while Free TH is able of 28. Ideally for apllications of fast doors and wandering 

control. 

Manual functionning

While pressing the button, tag works exactly the same as a traditional transmitter. It only sends the TAG code plus Open Group 
(Group 0 by default) and channel 1. So every receiver in which this information has been learned will accept the TAG information 
and will activate the outputs.

The difference between both ways of functionning of

 Free

 system lies on the quantity of information is transmitted by the TAG 

to the receiver.  While working as hands free, trigger plus tag information are sent, but while working manually, only an open 
group plus tag information are sent. 

Free

T tag also works though a push button in difference from

 Free

TH. In this very case, the fuctionning is manual.

Tag code + Trigger Group 

+ Activation Channel

Channel 2 - Group 1

Channel 3 - Group 1

Channel 2 - Group 1

Channel 4 - Group 1

Group 1

Channel 1 - Group 0

Channel 2 - Group 2

Channel 3 - Group 2

Channel 4 - Group 2

Group 2

be a step ahead with technology and imagination

jcm

technologies

Summary of Contents for Free30r





















Reviews: