P/N 960-000180R_Rev. 1 {EDP #233427}
© 2016, JAPAN CASH MACHINE CO., LTD.
4 - 3
Disassembly/Reassembly
DBV® Series DBV-400 Banknote Validator
Section 4
3. Unplug the single (1) Connector (Figure 4-11
a
).
4. Remove the four (4) Mounting Screws (Figure 4-
c
1
through
c
4
) securing the Inside Validation
Sensor Board (Figure 4-11
b
), and remove the
Inside Validation Sensor Board from the Valida-
tion Guide Cover D4 (Figure 4-11
d
).
Outside Validation Sensor Board
Removal
To remove the Outside Validation Sensor Board,
proceed as follows:
1. Remove the six (6) Mounting Screws (Figure 4-
b
1
through
b
6
) securing the Outside Guide
Cover (Figure 4-12
a
) to the Validation Guide
c
).
2. Unplug the single (1) Connector (Figure 4-13
a
).
3. Remove the four (4) Mounting Screws
b
1
and
b
4
) securing the Outside
c
), and remove the
Outside Validation Sensor Board from the Valida-
tion Guide (Figure 4-13
d
).
Figure 4-10
Figure 4-10
Validation Guide Removal
a
a
b
1
b
2
b
3
c
b
4
Inside Validation Sensor Board
Figure 4-11
Inside Validation Sensor Board
Removal
b
1
c
3
c
4
d
Figure 4-12
Figure 4-12
Outside Guide Cover Removal
a
a
b
1
2
b
3
b
4
b
5
b
6
c
Figure 4-13
Outside Validation Sensor Board
Removal
Figure 4-13
Outside Validation Sensor Board
Removal
a
b
c
d
