P/N 960-000180R_Rev. 1 {EDP #233427}
© 2016, JAPAN CASH MACHINE CO., LTD.
6 - 4
Section 6
DBV® Series DBV-400 Banknote Validator
Calibration and Testing
5. Launch
the
“
JCM Tool Suite Standard Edition
”
Application. The Screen shown in Figure 6-15
will appear when the application opens.
When downloading the Software Program to the
DBV-400 Unit for the first time, the Device
Information will not appear (Figure 6-16).
6. Click and hold-down the “
Service Mode
” Pull-
Down Menu and select “
Download
a
) from the Menu. The selected Field will high-
light
Blue
, and the Bezel LED will flash at a
Green
Color rate.
7. When “Download” is selected, the “
JCM Down-
loader Suite Edition Version X.XX
” will
automatically begin functioning, and the Screen
shown in Figure 6-18 will appear. Click on the
“
Browse
” Screen Button (Figure 6-18
a
).
8. Click the appropriate DBV-400 Software Pro-
gram Version shown in
the
Download File
Screen
a
), and then click on the “
Open
”
Screen Button (Figure 6-19
b
).
9. When
the
“
JCM Downloader Suite
” Screen
re-appears, click the “
Download
” Screen
Button (Figure 6-20
a
) to begin the Software
download into the DBV-400 Unit.
The
Download
Screen will display a Progress Bar
during the download operation (Figure 6-20
b
),
and a
Blue
Text Line
below the Download Screen
Button will display the download Percentage as
“
Downloading : XX%
c
).
The Bezel LED will flash a
Green
Color rate at a
longer interval during this operation.
10. When the download is complete, the “
Download
Success. Reset Done. Waiting for USB Cable
Disconnection
.
” Status Line will appear (Figure 6-
a
). Confirm that the Host Checksum (CRC)
value and the Device Checksum (CRC) value
match identically (Figure 6-21
b
).
This completes the DBV-400 Software Download-
ing Procedures.
Figure 6-15
Figure 6-15
Normal Upgrade Screen
Figure 6-16
Figure 6-16
Initial Download Screen
Figure 6-17
JCM Tool Suite Standard Edition
Screen Pull-Down Menu
Figure 6-17
JCM Tool Suite Standard
Edition Screen Pull-Down Menu
a
Figure 6-18
Figure 6-18
Browse Screen Button Location
Figure 6-19
DBV-400 Software Program Selec-
Figure 6-19
DBV-400 Software Program Selection
a
b
NOTE: Select the correct DBV-400
Firmware for the Country desired.
Figure 6-20
Figure 6-20
Download Progress Screen 1
a
b
c
Figure 6-21
Figure 6-21
Download Completed Screen 1
a
b=
