162
14.14 WITH LINES ON SLIP Before printing beginning
On G-556 a fix number of advance lines can be defined in programming mode, these
lines of advance will be executed in automatic mode at every activation of the printing of a
document in the Slip Printer (Invoice and/or Bill).
The purpose of this function is obviously that to give the possibility of to use with the
ECR and Slip Printer paper modules with the Restaurant's heading printed of various
dimensions.
The number of white lines definibile during the ECR programmation can go from 0
(zero) to 20 (twenty).
Beyond to the lines defined in programming, in G-556 it will be possible also to insert
other lines (until 20) of advance in manual way, in order to insert in manual way the ulterior
lines of advance, to execute following steps :
- Place a paper sheet in the external Slip Printer.
- Press the INVOICE key or the BILL key.
- Before beginning the registrations, to input the number of lines with which it is
wanted to advance the paper sheet inserted in the Slip Printer, as an example "12"
(the number of lines cannot exceed the 20).
- Press again the INVOICE key or the BILL key, the key pressed at this point must
be the same one pressed previously.
- At this point the Slip Printer will make to advance the paper with the number of input
lines.
- To continue now with the registrations (In case of status system 14H=0) or print
Invoice or Bill by press "Invoice" key or "Bill" key (In case of status system 14H=1).
