© 2016, JCM American Corporation
4 - 5
Disassembly/Reassembly
Section 4
Presenter Rollers
To remove the Lower Idler Presenter Rollers, pro-
ceed as follows:
1. Remove two (2) screws securing the Lower Idler
Roller and Springs (Figure 4-15
a
1
and
a
2
).
2. Lift the Roller Cover (Figure 4-15
b
) off of the
Assembly.
3. Remove two (2) tension springs (Figure 4-15
c
1
and
c
2
).
4. Lift the Idler Roller (Figure 4-15
d
) and Mount-
ing Brackets (Figure 4-15
e
1
and
e
2
) away from
the Presenter.
5. Remove four (4) screws (Figure 4-16
a
1
thru
a
4
)
securing the Motor Mounting Bracket
b
).
6. Remove two (2) Snap Rings securing the two
gears (Figure 4-17
a
1
and
a
2
).
7. Remove two (2) Snap Rings on the Right side
a
1
and
a
2
).
8. Remove the four (4) Roller Bushings (2 Left/2
Right) (Figure 4-19
b
1
thru
b
4
).
9. Remove the two (2) Presenter Rollers (Figure 4-
c
1
and
c
2
).
Figure 4-15
Remove Lower Idler Roller
a
1
a
2
c
1
c
2
d
b
e
1
e
2
Figure 4-16
Remove Motor Mounting Bracket
a
1
a
2
a
3
a
4
b
Figure 4-17
Remove Snap Rings Left
a
1
a
2
Figure 4-18
Remove Snap Rings Right
a
1
a
2
Figure 4-19
Remove Roller Bushings and
Presenter Rollers
b
3
b
4
b
1
b
2
c
1
c
2
