manualshive.com logo in svg

JCM iPRO-100-SH2-RC, Operation And Maintenance Manual

The JCM iPRO-100-SH2-RC is a cutting-edge device that streamlines operations and maintenance processes. Ensure proper usage and maximized performance with the comprehensive Operation and Maintenance Manual. Download this essential manual for free from our website, where user manuals are readily available for immediate access.

Share
Download
background image

P/N 960-000164R_Rev. 3 {EDP #213631} 

© 2018, JAPAN CASH MACHINE CO., LTD. 

vii

iPRO-RC™ Series 

Banknote Recycler 

List of Figures

Page

Figure 1-1 iPRO-RC Unit Assembly  ...................................................................... 1-1
Figure 1-2 Precautionary Symbols  ........................................................................ 1-2
Figure 1-3 Unacceptable Banknotes  ..................................................................... 1-4
Figure 1-4 Banknote Storage Insertion Cautions   .................................................. 1-4
Figure 1-5 iPRO-RC Component Names  .............................................................. 1-5
Figure 1-6 iPRO-RC Banknote Recycler Standard Unit with Bezel 

Outside Dimensions  ............................................................................. 1-8

Figure 1-7 iPRO-RC Banknote Recycler Standard Unit with Bezel, 

Lock Unit and Outside Dimensions  ...................................................... 1-8

Figure 1-8 iPRO-RC Banknote Recycler Standard Unit with Bezel 

Outside Dimensions  ............................................................................. 1-9

Figure 1-9 iPRO-RC Banknote Recycler Standard Unit with Bezel, 

Lock Unit and Outside Dimensions  ...................................................... 1-9

Figure 2-1 M4 Screws Locations (Right/Left)  ........................................................ 2-1
Figure 2-2 M4 Screws Locations (Rear & Bottom)  ................................................ 2-1
Figure 2-3 Cable Interconnection  .......................................................................... 2-2
Figure 2-4 CPU Board Switch Locations  ............................................................... 2-2
Figure 2-5 Banknote Restoration Methods   ........................................................... 2-9
Figure 2-6 Retrieving Recycler Banknotes  ............................................................ 2-9
Figure 2-7 Clearing a Banknote Jam 1   ............................................................... 2-10
Figure 2-8 Clearing a Banknote Jam 2   ............................................................... 2-10
Figure 2-9 Sensor and Roller Cleaning  ............................................................... 2-11
Figure 2-10 iPRO-RC Sensor Cleaning Locations  ................................................ 2-12
Figure 2-11 iPRO-RC USB Interface Schematic Diagram   .................................... 2-13
Figure 2-12 iPRO-RC Photo-Coupler Interface Schematic Diagram   .................... 2-14
Figure 2-13 iPRO-RC RS232C Interface Schematic Diagram  .............................. 2-15
Figure 2-14 iPRO-RC ccTalk Interface Schematic Diagram   ................................. 2-16
Figure 2-15 iPRO-RC Bezel Circuit Interface Schematic Diagram   ....................... 2-17
Figure 2-16 iPRO-RC Operational Flowchart (Primary Sequence)  ....................... 2-18
Figure 2-17 iPRO-RC Operational Flowchart (Validation)   .................................... 2-19
Figure 2-18 iPRO-RC Operational Flowchart (Stacking/Recycler Unit)   ................ 2-20
Figure 2-19 iPRO-RC Operational Flowchart (Stacking/Cash Box)  ...................... 2-21
Figure 2-20 iPRO-RC Operational Flowchart (Dispensing)   .................................. 2-22
Figure 2-21 iPRO-RC Operational Flowchart (Abnormal Error)  ............................ 2-23
Figure 2-22 iPRO-RC Operational Flowchart (Retrieving)   .................................... 2-24
Figure 2-23 iPRO-RC Operational Flowchart (Retrieving/Cash Box)   ................... 2-25

Summary of Contents for iPRO-100-SH2-RC



















































































































































Reviews:

No comments

Related manuals for iPRO-100-SH2-RC

Brands by name

Popular brands

Load more brands