P/N 960-000164R_Rev. 3 {EDP #213631}
© 2018, JAPAN CASH MACHINE CO., LTD.
6 - 1 1
Performance Tests
iPRO-RC™ Series Banknote Recycler
Section 6
word will again turn to Grayed-out
text (Figure 6-52
b
).
5. Click on the “
Save Sensor Data
”
Function Screen Button (Figure
c
) to reflect the saved Status in the related
result Field.
6. Click on the “
Load Sensor Data
”
Function Screen Button (Fig-
d
) to read the saved Status result data.
7. Confirm that the “
OK
” (Figure 6-52
e
) Status text
message appears in the Status result Field next to
the Double Note Detection text line label.
RC F
ULL
S
ENSOR
B
UTTON
C
ALIBRATION
1. Check that the Recycler Unit is Empty.
2. Click on the “
RC Full Sensor
”
Calibration Screen Button (Figure 6-53
a
).
3. Confirm that the iPRO-RC™ Unit LED indicates
a steady
Green
Color. The Bold Text “
Process-
ing
”
word appears during the Test’s
performance (Figure 6-53
b
).
4. When the RC Full Sensor Calibration is complete,
the Bold Text “
Processing
”
word
will turn to Grayed-out text (Figure 6-53
b
).
5. Click on the “
Save Sensor Data
”
Screen Button (Figure 6-53
c
)
to reflect the saved Status in the related result
Field.
6. Click on the “
Load Sensor Data
”
Screen Button (Figure 6-53
d
)
to read the saved Status result data.
7. Confirm that the “
OK
” text message (Figure 6-53
e
) appears in the Status result Field next to the
RC1 Full Sensor and the RC2 Full Sensor text
line labels.
Table 6-1 lists the Sensor Calibration Items, their
descriptions and their resulting configurations.
Individual Performance Test
The six (6) Function Buttons shown in
are for activating Calibration tests for the following
functions:
•
Transport Sensor Test:
Checks the Transport movement Sensor
•
Motor Test:
C
hecks the Motor Normal/Reverse rotation
•
Flapper Test:
Checks the Flapper’s movement
•
Lifter UP Test:
Checks the Lifter’s upward movement
•
Lifter DOWN Test:
Checks the Lifter’s downward movement
•
Get All Sensor States:
Reads all of the Sensor’s conditions.
Click on the desired Test Function Screen Button to
begin each Performance Test.
The Test begins, and will finish automatically. The
“
Processing
” display message appears in bold
Figure 6-52
Double Note Detection Sensor
a
c
b
e
NOTE: The LED will flash at a
Green
Color Rate when an abnormal condition
occurs!
Table 6-1
Sensor Calibration Configuration
Item
Description
Result
Double Note
Detection Sensor
Indicates the Double
Note Detection
Sensor’s Condition
Load OK = Current
Calibration Value
Read Completion
OK = Calibration
Success
NG = Abnormal
Condition
Occurred
RC1 Full Sensor
Indicates the RC1 Full
Sensor’s Calibration
Condition
RC2 Full Sensor
Indicates the RC2 Full
Sensor’s Calibration
Condition
Figure 6-53
Figure 6-53
RC Full Sensor
c
b
e
Figure 6-54
Figure 6-54
Test Function Screen Buttons
