© 2016 JCM American Corporation
2 1
October, 2016
TBV Transaction Based Validator
M
OTOR
S
PEED
T
EST
To display the Motor Speed in mm/sec, proceed as follows:
1. In the
MOTOR SPEED TEST
Section, click the
“
Start
”
Screen
Button (Figure 12
a
).
The Motor Speed will be displayed in mm/sec.
2. To end the Test, click the
“
Stop
”
Screen Button.
D
EVICE
F
UNCTION
T
EST
The Device Function Test is used to verify that the TBV Bezel LED Displays
properly by cycling through the Primary Colors (
RED
,
GREEN
,
BLUE
and
WHITE
).
To run the Device Function Test, proceed as follows:
1. In the
DEVICE FUNCTION TEST
Section, click the
“
LED TEST
”
Screen Button (Figure 12
b
).
The LED Test will cycle automatically with each of the Primary Colors being
lit.
2. To end the Test, click the
“
Stop
”
Screen Button.
3.
NOTE: If the Primary Colors (
RED
,
GREEN
,
BLUE
and WHITE) are not lit when
this test is run, the TBV Bezel LED is not functioning properly.
a
b
Figure 12
Motor Speed Test/Device Function Test Screen
