© 2016 JCM American Corporation
1 6
TBV Transaction Based Validator
October, 2016
OPERATION TESTS
A
CCEPTANCE
T
ESTS
To perform each Operation Test, proceed as follows:
1. Click the
Performance Test
a
).
2. In the
OPERATION TEST
b
), click the desired Test Screen
Button to begin the test.
The Bezel LED will be lit
BLUE
.
3. To start the Test, insert a Banknote into the TBV Unit.
4. Verify the Banknote’s value using either of the following methods:
•
LED Flash Count
- For each Banknote inserted, the Bezel LED will flash
PURPLE
for the Denomination Value detected. Count the number of LED
Flashes then refer to Table 10 on page 18 for Denomination Flash Codes.
•
Denomination Update
- Click the
Denomination
a
) to view the
Denomination Screen, then click the
“
Update
”
Screen Button
b
) to confirm the value of the Banknote inserted.
a
b
Figure 9
TBV Performance Tool - Operation Test Options
NOTE: For a complete list of Acceptance Test descriptions, refer to Table 10 on
page 18. Test information appears in
RED
at the bottom of the Performance Test
tab screen as each Test is running.
NOTE: For each Banknote inserted into the TBV Unit, the Flash Code repeats
three (3) times, then the Bezel LED color returns to
BLUE
.
