Bill Return Codes (con’t.)
Preventive Maintenance
(Head/Transport)
• Replace belts if frayed, slick and/or worn.
• It is important to keep the bill path, rollers and belts clean. The
sensor lenses are transparent and made of a polymer material.
Handle them with care. To clean them, we suggest using a lint-free
cloth and a mild, nonabrasive detergent, such as dish liquid soap
mixed with water.
Do Not use alcohol for cleaning
Note: JCM does not recommend - cleaning cards, cleaning pads,
or cleaning solutions of any kind.
Cashbox Preventive Maintenance (P/M):
Do Periodic P/M on the Cashboxes to ensure proper operation. Use
compressed air via can, or air compressor to blow out paper fibers and
any other debris that may build up over time. Check the belts and all
moving parts for wear and proper positioning. If this assembly does
not operate properly, it can cause bill jams.
After completing the P/M, we recommend Calibration.
# of
Blinks
Description
Possible Cause
11
12
13
14
Stacker lever problems
Timing error
Bill/Note length error
Color pattern error
•
Solenoid not working
• Sensor may not know po-
sition of the Stacker lever
• The timing is degraded
between the sensors that
track the bill/note move-
ment
• Bill/note is torn
• Registration on bill/note
is too short
•
Color pattern on the bill/
note is incorrect
Important Note: After wiping, inspect lenses to ensure that none
have been moved out of position, or are not flush with the path.
