4
ELECTRICAL HAZARD WARNINGS!
*Always check the power lead for any signs of wear or damage before connecting to a
power source. If any damage is evident DO NOT use the machine. Take it for repair to a
qualified electrician. Always make sure that the power lead does not hang over the side
of a work surface and is never close to any heat source such a hob, oven, toaster etc.
*NEVER let the lid of the halogen oven get wet and never use it close to a source of
water. NEVER put the lid in water for cleaning. If the lid is ever accidentally immersed in
water (or any other liquid) or gets wet, do not use it again until it has been inspected by
an authorised electrician or repair company. NEVER put the lid in a dishwasher.
*The plug is fitted with a 13 amp fuse. Replace with the same type if required. If you
need to replace the plug please observe the correct connection of the wires in the
power lead
. Blue to Neutral (marked “N” in the plug) - Brown to Live (marked “L” in the
plug) -
Green & Yellow to Earth (marked “E” in the plug). If you have any doubt about
this please get the wiring done by a qualified electrician, or telephone us for advice.
Under no circumstances should you make the wrong connections.
