15
User manual
6- Daily operation
6.6 Filling water tank
3. Fill the canister with desired ingredient.
Only for dispensers fitted with water tank option.
The display shows an icon and refilling instructions
on the display when the internal water tank is
empty (A). In this state the dispenser will also
be blocked from dispensing drinks (B), it will be
unlocked once the tank is refilled.
Follow the instruction to refill the water tank.
1. Grab the tank in the handle at
the front. Push slightly up while
pulling the tank straight out.
2. Fill up the tank to the MAX
indication (3L) with fresh and
cold tap water.
3. Put the water tank back into the
dispenser. Push the tank all the
way in until it hooks in place at
the front.
4. Put the canister back into the dispenser, make
sure the guide pin at the bottom front of the
canister is put into the guide hole.
Rotate the canister outlet back so it points
towards the mixer bowl, close the door and the
dispenser is ready to use.
