21
User manual
7.7 Disassembling the mixing system
To remove and clean the mixer bowl, follow the steps below:
If the dispenser is fitted with the Instant option the display will show:
CLEAN MIXER BOWL PRESS ENTER TO CONFIRM.
Please make all steps in point 7.7 before you press
ENTER
or use the replacement mixer bowl to save
time. If the dispenser doesn’t have the instant option, skip this step.
Fig.4 - Remove the mixer bowl by
pulling it straight out.
Fig.3 - Turn the mounting plate
level counter-clockwise to the
Unlock position(A).
Lock
Unlock
Remove
A
Fig.2 - Open the water treatment
panel (1), pull the outlet connector
off of the mixer bowl (2) and pull
the outlet off the clip (3).
1
3
2
Fig.6 Rotate the mounting plate
counter-clockwise beyond the
“Remove” position until it stops
turning (1). Pull the plate straight
out (2).
1
2
Fig.7 Remove the steam trap filter
and its cover.
Fig.5 - Use the included tool to
remove the whipper. Place the
tool behind the whipper. Gently
push inward on tool the handle to
release the whipper (1). Pull the
whipper straight out (2).
1
2
7- Cleaning
Fig.1 - The display will show
REMOVE AND CLEAN MIXING
BOWL, REINTALL A CLEAN MIXING
BOWL, PRESS ENTER TO CONFIRM.
