7
E
RROR MESSAGE
O㜄⤠Gⵐ㈑GᷱḔGP
The disc tray is not loaded to the chuck within fixed time (8 sec).
The magazine is not through out while eject function is executing.
1. NO MAGAZINE
There is no magazine.
The disc tray does not reach to the target position by the up/down elevator motor after a certain time(8sec) passed.
The PICKUP is not moved by sled motor to the center area even after a certain time (8 sec) passed.
(1) It is not completed despite more than 3 time of focusing trial.
(3) During certain time(15sec), can not read the TOC(Total Of Contents) in the disc.
When the trouble as above contents appears Please contact service center near by in your area.
ERROR MESSAGE
(2) The spindle motor can not enters to the CLV(Constant Linear Valocity)mode for the disc rotation.
svkpun┍㣅G㩅G㢰㥉㐐ᴸG㢨ㇵO_PGᷱḰ㐐㜄⓸Gsvkpun㢨G㝸⨀╌㫴G㙾㡴Gㇵ䈐U
lqlj{┍㣅㢌G㍌䚽㩅Gthnhpulⵝ㻐㢨G⺼ᴴ⏙䚐Gㇵ䈐
thnhpul㢨G㛺ḔSGkpzjᴴGjshtwpunG╌㛨㢼⏈Gㇵ䈐U
lsl}h{vy㢨┍G㩅G㢰㥉㐐ᴸG㢨ㇵO_PGᷱḰ㐐㜄⓸G⯝䖐G㫴㥄㜄G⓸␠䚔G㍌G㛺⏈Gㇵ䈐U
zslkG㺐⇨㨰G㢨┍G㩅G㢰㥉㐐ᴸG㢨ㇵO_PGᷱḰ㐐㜄⓸Gwpjr|w㢨G㺐⇨㨰⦐G㢨┍G䚔G㍌G㛺⏈Gㇵ䈐UG
OXPGZ䟀G㢨ㇵ㢬Gmvj|zpunG┍㣅㜄⓸G㝸⨀╌㫴G㙾㡴ㇵ䈐U
OZPG{vjGylhk㩅G㢰㥉G㐐ᴸ㢨ㇵOX\PGᷱḰ㐐㜄⓸Gylhk㝸⨀ᴴG╌㫴G㙾㡴Gㇵ䈐U
|usvkpun┍㣅G㩅G㢰㥉㐐ᴸG㢨ㇵO_PGᷱḰ㐐㜄⓸Gsvkpun㢨G㝸⨀╌㫴G㙾㡴Gㇵ䈐U
OYPGjs}Gvu┍㣅G㩅Gjs}㥉㋁Gtvkl㜄G⓸␠䚔G㍌G㛺⏈Gㇵ䈐⇌SGZU\㢨ㇵG᷸㋁䚨㉐Gz|ixG㢹⥙㢨GGlyyvyGkh{h
GGGGG㢨ᶤ⇌Gz|ixG㢹⥙㢨G㛺⏈Gㇵ䈐U
㜄⤠
ⵐ㈑
ᷱḔ
ㇵὤG㫑ㇵ㢨G⇌䇴⇌⮨Gᴴᾀ㟨G㉐⽸㏘㉰䉤㜄GGⱬ㢌䚌㜠G㤵㤼䚐G㉐⽸㏘⪰Gⵏ㡰㐡㐐㝘U
2. Err EJECT
3. Err LOAD
4. Err UNLOAD
The disc tray is not loaded in the magazine within fixed time (8 sec).
5. Err ELEVATOR
6. Err SLED
7. Err DISC
*** There is not a possibility of reading if the disk being damaged(scratched).
1. NO MAGAZINE
2. Err EJECT
3. Err LOAD
4. Err UNLOAD
5. Err ELEVATOR
6. Err SLED
7. Err DISC
GGGGGQQQG♈㏘䆠ᴴGἵ䣌☥㜄G㢌䚨G㋄ㇵ㢨G㢼⏈Gᷱ㟤G⒤㢨䉤⪰G㢱㫴G⯯䚝⏼␘UU
Summary of Contents for 6CD-100M
Page 1: ......
