Chapter 7
File management
Creating a screenshot
User Manual
790000002/00
55
You can also transfer file(s) from the bluetooth device toward the Plat-
form.
In this case, the files received will be stored in a storage media created
automatically on the Platform:
bluetooth-inbox
.
Removing the
Pairing
1
To remove the pairing between the two equipments, in the
System
Settings
page, push the
Bluetooth Pairing
key
2
In the screen displayed, push the
Remove pairing
key
The icon on the upper banner of the screen becomes
showing the
Platform is no more connected to a bluetooth device, but the Bluetooth
option is still active.
To deactivate the bluetooth onto the Platform, go in the
System Settings
page, and under
I/O Interfaces
, select
Disable
on the
Bluetooth
line.
Creating a screenshot
You can create captures of what is displayed on the screen, directly from
the 2000 Platform.
Configuring the
parameters of
screenshots
To configure the screenshot and choose the format of the generated file:
1
Press
H
OME
hard key
2
Select the
Settings
icon to reach the
System Settings
page.
3
In the
Report
box, on the line
Mode
, select
Screenshot
Choosing this option, you can save the displayed screen in JPG,
PNG or PDF format, exactly as it is displayed on the screen.
Therefore, if you make a zoom on the trace for example, the file will
only show the zoom section.
4
On the line
File format
, select if the printed file will be a
JPG
,
PNG
or
file.
Taking a
screenshot
Once the screenshot parameters are configured:
1
Reach the display which will be saved as a screenshot in a file.
WARNING
The files stored in bluetooth-inbox will be lost once the 2000
Platform is switched off. Move the files to keep toward another
storage media (disk, usb key...).
2000 Platform English rev00.book Page 55 Lundi, 20. juin 2011 1:47 13
