Chapter 3
Starting up
Fitting and removing a module
14
User Manual
790000002/00
Fitting and removing a module
Fitting a
module
1
Turn the instrument face down on the work surface.
2
Set the two notches on the module part
(1a)
into the two holes
provided for that purpose on the Base
(1b)
.
3
Make flush the 2 connections
(2a & 2b)
, on module and base.
4
Once positioned, fix the module to the base screwing the 2 screws
(3a)
fixing the receptacle.
Removing a
module
1
Unscrew the two captive fixing screws of the module completely (up
to the stop).
2
Remove the two slots of the module from their housing onto the
base.
3
Carefully remove the module out of its slot.
The 2000 Platform must be switched off, and if it is operating on
the mains, its supply cable must be unplugged.
Fig. 6
Fixing the module to the base
Captive screws f
ixing the module
1b
1b
2a
2b
2000 Platf
orm with
module in
stalled
2000 Pla
tform
without m
odule
1a
1a
3a
3a
2000 Platform English rev00.book Page 14 Lundi, 20. juin 2011 1:47 13
