Chapter 5
Power meter, VFL (Visual Fault Locator) & Talkset
Talkset Function
34
User Manual
790000002/00
–
If the remote instrument is ready to receive (on standby), the Talkset
icon turns orange, beeps are emitted, and the icon
appears at
the top of the screen: telephone communication can now take place.
–
If the remote instrument is not ready to receive, the Talkset icon
does not change color and a message is emitted.
Adjusting
volume level
The sound is transmitted to the earphones of the headset and, if this
function has been activated, to the speaker in the 2000 Platform base. To
activate the base loudspeaker and adjust the volume:
1
Press the
H
OME
key.
2
Validate
Settings
icon to reach the
System Settings
page.
3
Under the
Audio
box, select
Headset
Volume
and adjust the
volume.
Disconnection
When communication is over, deactivate the
Talkset
function on the
2000 Platform. This deactivation can be done by either 2000 Platform.
Then, the fiber used for Talkset, can be disconnected from each Platform
safely.
NOTE
The talkset icon is displayed on the top banner as long as communi-
cation remains established, letting the user know that the connection
is working.
When communication is established, the headset is automatically
enabled if plugged in. However, the loud speaker must be correctly
configured in the setup menu to work accordingly
2000 Platform English rev00.book Page 34 Lundi, 20. juin 2011 1:47 13
