Chapter 6
Scope
Configuring the P5000 Scope
38
User Manual
790000002/00
Report
The parameters in
Report
box allow to configure the Report page setup.
On the line
Company
, enter the name of your company using the edition
keypad.
On the line
Logo
, you can select an image on the 2000 Explorer once
clicking on the right arrow key, which will be displayed on the upper left
part of the report. Press the
S
ETUP
key to return back to the
Setup
page.
On the line
Operator
, you can enter the name of the operator, which will
be displayed on the header of the report.
for a description of the pdf report.
Fiber
The
Fiber
box allows to configure the fiber plugged to the scope.
On the line
Fiber Name
, use the edition keypad, which will display by
clicking on the right arrow key, to enter a specific name for the fiber.
On the line
Fiber Number
, use the numeric keypad, which will display by
clicking on the right arrow key, to enter the fiber number.
Press
Exit
to return to the Results screen of the scope.
Adding a new
profile
Once the
Setup
screen of the scope is displayed, you can add a specific
profile which will be used for the test.
The profile must be created via FiberChek2
TM
, and stored on one
storage media of the MTS/T-BERD 2000 (disk, or USB memory stick).
1
On the
Setup
screen, select
Profile
and press
Add
key.
2
On the explorer, select the file which will be used as profile (icon
; extension: .PRO)
3
Press
Load
.
Once loaded, the display goes back automatically to Setup screen.
4
Select the profile just loaded.
Removing a profile
1
In the
Profile
list, select the profile to be deleted.
2
Press
Remove
key., then
Exit
.
2000 Platform English rev00.book Page 38 Lundi, 20. juin 2011 1:47 13
