Chapter 6
Scope
Launching a test of the connector and fiber end-face
User Manual
790000002/00
41
The test is completed:
–
once the Led
Testing
is no more lit in red
–
once the icon
is no more displayed on the upper banner
–
once a screen as the following one displays:
A summary of test results is displayed on the right, upper part of the
screen.
–
Zone A: represents the Core zone: it is the area
surrounding the core
–
Zone B: represents the Cladding zone. It
surrounds the majority of the fiber cladding.
–
Zone C: represents the Ferrule zone: it identifies
a portion of the ferrule near and around the fiber
NOTE
To configure the Pass/Fail critera, refer to
.
Fig. 20
Test results
Test result in
High mag.
Profile selected
in the Setup page
Summary of
Test results
Zone C
Zone B
Zone A
NOTE
To return to a Live Camera image, press the
Camera/Freeze
key; or
press the
Full Screen/Mosaic
key view both the live image and a test
result simultaneously.
In
Mosaic
mode (see
), the result of the test
only displays Pass or Fail information; the status of each zone is dis-
played only in full screen mode.
2000 Platform English rev00.book Page 41 Lundi, 20. juin 2011 1:47 13
