Chapter 8
Transferring the 2000 Platform Interface
Establishing connection
User Manual
790000002/00
65
– IP Address
IP address of the 2000 Platform
– IP Mask
address of the mask of the sub-network
– IP Gateway
IP address of the machine enabling access outside
the sub-network.
– DNS
1
IP address of the machine providing the IP
address on the basis of the name
– Domain name name of the local network to which the 2000 Plat-
form is connected.
Dynamic
in this mode, which requires a DHCP server, the
2000 Platform requests an IP address from this
server which will be allocated dynamically if
dynamic host configuration is activated on the
local network.
After selecting this mode or after power-on, the
2000 Platform tries to establish a connection to
obtain an address from a DHCP server. If for any
reason, this process fails, the 2000 Platform
reverses to static IP address mode with User1 IP
address.
Proxy > Use proxy
1
Select
No
if no proxy is used.
2
If
Manual
has been selected, enter the
Proxy Address
.
3
If
Auto
has been selected, enter the
Pac Address
.
4
Note the IP Address displayed in the System Settings page.
5
Wait about 10 seconds the connection is established.
The 2000 Platform Interface can now be transferred onto the PC, or the
internal memory or USB key ocntents can be transferred on PC..
1.Domain Name Server
NOTE
Once the 2000 Platform is connected to the network, the icon
indicates the connection is working.
Fig. 39
Example of configuration for I/O Interfaces box
Note the 2000 Platform
IP Address
2000 Platform English rev00.book Page 65 Lundi, 20. juin 2011 1:47 13
