![background image](http://html2.mh-extra.com/html/jds-uniphase/p5000i/p5000i_user-manual_3584697016.webp)
USER MANUAL
16
•
Select the appropriate inspection
tip that corresponds to the
connector type and side being
inspected and attach to probe.
INSPECTION TIP
BARREL ASSEMBLY
•
In the
TIP
section, select the pre-
configured Optical Setting from
the dropdown list
(see page 18
for descriptions).
1.
Open/Launch FiberChekPRO
2.
Install Inspection Tip
•
Locate FiberChekPRO application
and open.
Using FiberChekPRO
with
P5000i Digital
Analysis Microscope
CHAPTER 3
P5000i Digital Analysis Microscope
FiberChekPRO
Desktop Icon
3.
Select Profile Setting
•
From the pre-configured
PROFILE
settings dropdown list, select
the appropriate connector being
inspected.