PROGRAMMING AND OPERATION - Pre-defined Menus
Time Label
Selecting Time Label as a menu item will bring up the Time Label field. Select the Time Label you want to control then type the name
you want to appear on the menu line (up to 10 characters) or select a bit map graphic then click OK. Double-clicking the name in the
list will insert the first 8 or 10 characters of the name into the text box (depending on size selected).
When the Time Label menu button is pressed, the screen switches to the Time Label menu. The top menu line of the Time Label
menu displays the name you assigned. The next menu line lists the days of the week by first letter (SMTWTFS). Pressing the
RIGHT side of button #2 scrolls through each day. An underline below the letter indicates the selected day. Pressing the LEFT
side of button #2 inserts or removes an asterik (*) below the selected day(s). The asterik indicates the day(s) the Time Label is
in effect. The next menu line down displays the time of day the Time Label is in effect. Button #4 ("HR") sets the Hour (left side
decrements, right side increments). Button #5 ("MIN") sets the Minutes (left side decrements, right side increments). Button #7
("CANCEL") returns to the previous menu without saving any changes. Button #8 ("OK") enters the new Time Label data and
returns to the previous menu.
NOTE: In order for a TimeLabel to be controlled exclusively from the keypad, deselect all the days of the week when defining
the Time Label in WinEVM and select "TimeLabels" in the download options. Once downloaded, the TimeLabel can only be
programmed by a keypad. (If a "Touchtone to TimeLabel" function is used in the schedule, it can change the TimeLabel time but
not the day of the week.) Deselect "TimeLabels" in the download options for future downloads, otherwise any settings made from
the keypad will be overwritten. Software/Firmware updates will clear Time Label settings. It is necessary to reset Time Label
settings from a keypad after updating software/firmware. Changes made to Time Label settings from a keypad will not appear
in the WinEVM Define - Time Label field.
Set-Clear/Day Select
Decrement Hour/Increment Hour
Decrement Minutes/Increment Minutes
Go To Previous Menu Without Saving
Save Changes & Go To Previous Menu
16
Select
Copy Keypad
