background image

07

SAFETY WARNINGS FOR CHARGERS AND 

BATTERY

Battery

- Never attempt to open for any reason.

- Do not expose to water.

- Do not incinerate the battery pack even if it is severely 

damaged or is completely worn out. The battery pack can 

explode in a fire.

- Do not store in locations where the temperature may exceed 

40C.

- Do not leave the battery pack in the charger when the charging 

is finished, otherwise battery leakage may occur.

- Charge only at room temperature.

- Charge only using the charger provided with the tool.

- Before charging, make sure that the battery is dry and clean.

- Use only the correct type of battery for the tool.

- When dispose of batteries follow the instructions given in the 

section “protecting the environment”.

- Under extreme conditions, battery leakage may occur.  When 

you notice liquid on the battery, proceed as follows:

- Carefully wipe the liquid off using a cloth. Avoid skin contact.

In case of skin or eye contact, follow the instructions below.

- The battery fluid, a 25-30% solution of potassium hydroxide, 

can be harmful. In case of skin contact, immediately rinse with 

water.  - Neutralize with a mild acid such as lemon juice or 

vinegar. In case of eye contact, rinse abundantly with clean water 

for at least 10 minutes.  Consult a physician.

NOTE: The batteries in your battery pack are the Lithium-Ion 

type. Do not dispose of battery packs/batteries into household 

waste, fire or water. Battery packs/batteries should be collected, 

recycled or disposed of in an environmental-friendly manner.

Summary of Contents for ZQ561


















Reviews: